top of page

Keep your pet safely inside the garage while you're using it with a Buddy Gate.  The 8 foot dog garage gate consists of 3 panels 31.0" W x 34.0" H each.  The dog safety gate when assembled is 93" long and the bars are 3.0" apart.  Buddy Gate mounts and folds up in seconds so you can easily set it up when needed and store it when not in use.  The gate has a swinging door for easy access and swinging panels for a bigger opening.  Buddy Gate is made of all metal parts and powder coated panels for durability.  Please properly measure your garage door frame to make sure the Buddy Gate will fit.  It should be about 96".

 

READ BEFORE ORDERING.

The screws provided are made for wood door frames.  The door frame should be no less than 95" and no more than 97" wide.  The garage floor should be relatively level.  Assembly and tools are required.  *Buddy Gate should only be used under supervision.

 

Tools Needed:

  1. Wrench Set or Adjustable Wrench
  2. Phillips Screwdriver
  3. Tape Measure or Ruler
  4. Hand Level (not required but helpful)
  5. Recommended: Hand Drill with a 3/32 and 11/64 drill bit (or similar sizes for pilot holes)

8 Foot Outdoor Garage Gate

SKU: BG8OUT
$219.00Price
  • Color: White

    Use w/ Door Frame Width: 96 inches

    Size of Gate Opening: 93 inches

    Length of Panels: 30.8 inches

    Total Length: 93 inches

    Height: 34.0 inches

    Width of Frame: 0.8 inches

    Fold-up Size: 33 x 35 x 5 inches

    Weight: 26.5 pounds

    Bar Diameter: 0.35 inches

    Distance between Bars: 3 inches

    Package Size: 36 x 31.5 x 3.5 inches

    Package Weight: 29.2 pounds

     

    READ BEFORE ORDERING.

    The garage frame should be made of wood and the garage floor should be relatively level.  Garage door frame should be no less than 95 inches and no more that 97 inches wide.  Assembly and tools are required.  

    Tools Needed:

    • Wrench Set or Adjustable Wrench
    • Phillips Screwdriver
    • Tape Measure or Ruler
    • Hand Level (not required but helpful)
    • Recommended: Hand Drill with a 3/32 and 11/64 drill bit (or similar sizes for pilot holes)

     

    MAINTENANCE & CLEANING

    Periodically check to make sure all the nuts are fully tightened.  If any part becomes damaged, replace before reusing.  If any part of the paint gets chipped or scratched, it is recommended to use a matching touchup paint to prevent any further damage and prevent rust.

    When left outside in the rain, some rust colored water may settle on the bars.  To clean at anytime, use a mild detergent and water, and clean with a soft sponge or cloth.  Cleaning with a scrub brush and/or abrasive object or polish may cause scratches, rust, and/or discoloration.  Do not use harsh chemicals such as alcohol or thinners as it may damage the paint.