top of page

Keep your pet safely inside the garage while you're using it with a Buddy Gate.  The 16 foot indoor garage gate consists of six panels 31" W x 34" H, four panels 12" W x 34" H and two wood mounts.  The dog safety gate when assembled is 211.5" long and a total of 216.5" including the wood wall mounts.  All bars are 3" apart.  Buddy Gate mounts and folds up in a few minutes so you can easily set it up when needed and store it when not in use.  The gate has a swinging door for easy access and swinging panels for a bigger opening.  Buddy Gate is made of all metal parts and powder coated panels for durability.  Please properly measure your garage door frame to make sure the Buddy Gate will fit.  *It should be about 189"-192".  Watch the video and read the details below to make sure Buddy Gate will fit and mount in your garage.

 

***READ BEFORE ORDERING.

Buddy Gate can be mounted into drywall, wood or brick walls.  Assembly and tools are required.  The door frame should be no less than 188" and no more than 193" wide.  The garage floor should be relatively level.  If mounting into drywall, make sure it is at least 1/2" thick and free of any water or moisture damage on both sides.  Plywood can be used to make a more solid area to mount to if needed.   Below is a list of tools needes and key measurement that need to be taken prior to ordering to make sure Buddy Gate will fit in your garage.  *Buddy Gate should only be used under supervision.

 

Tools Needed:

  • Wrench Set or Adjustable Wrench
  • Phillips Screwdriver
  • Tape Measure or Ruler
  • Hand Level (not required but helpful)
  • Hand Drill with a 7/8 drill bit

 

Additional Tools Needed for Drywall:

  • May need wood screw if you are on a stud

 

Additional Tools Needed for Brick:

  • 6 Masonary Screws (3/16" by 2 1/4")
  • 6 smaller washers so the screw head does not go through the larger washer
  • 5/32" Masonary Drill Bit
  • Harder material may require a hammer drill
  • Tape Measure or Ruler

 

Additional Tools Needed for Wood:

  • 6 Wood Screws (1/4" by 2 1/4")
  • 6 smaller washers so the screw head does not go through the larger washer
  • 7/32" Wood Drill Bit

 

In some situations (drywall is too thin/damaged or wall surface is not flat), applying plywood to the wall surfaces and mounting to the wood.  We recommend using at least a 1/2" thick plywood.

16 Foot + Indoor Kit

SKU: BG16IN
$469.00Price
  • Color: White

    Use w/ Door Frame Width: 189-193 inches

    Size of Gate Opening: 123 inches

    Length of Panels: 30.8 inches

    Length of Kit Panels: 12 inches

    Distance from wall: 13 inches

    Total Length of Each Gate: 93 inches (Total Length: 216 inches)

    Height: 34 inches

    Width of Frame: 0.8 inches

    Fold-up Size: 2 Sets - 32 x 34.25 x 5 inches 

    Weight: 49.8 pounds

    Bar Diameter: 0.35 inches

    Distance between Bars: 3 inches

    Distance between Gates: 3 inches

    Package Size: 2 Boxes - 36 x 31.5 x 3.5 inches each

    Package Weight: 2 Boxes - 29.2 pounds each

     

    READ BEFORE ORDERING.

    The garage frame should be made of wood and the garage floor should be relatively level.  The door frame should be no less than 188" and no more than 194" wide.  Assembly and tools are required.  

    Tools Needed:

    • Wrench Set or Adjustable Wrench
    • Phillips Screwdriver
    • Tape Measure or Ruler
    • Hand Level (not required but helpful)
    • Recommended: Hand Drill with a 3/32 and 11/64 drill bit (or similar sizes for pilot holes)

     

    MAINTENANCE & CLEANING

    Periodically check to make sure all the nuts are fully tightened.  If any part becomes damaged, replace before reusing.  If any part of the paint gets chipped or scratched, it is recommended to use a matching touchup paint to prevent any further damage and prevent rust.

    When left outside in the rain, some rust colored water may settle on the bars.  To clean at anytime, use a mild detergent and water, and clean with a soft sponge or cloth.  Cleaning with a scrub brush and/or abrasive object or polish may cause scratches, rust, and/or discoloration.  Do not use harsh chemicals such as alcohol or thinners as it may damage the paint.

     

  • RETURN POLICY

    We offer a 30-day return policy for products with a proof of purchase.  If you are unsatisfied with your purchase, please contact us at info@BuddyGate.net for directions on returning.  Customers are responsible for return shipping charges.

    If product was purchased from a 3rd party (not the Buddy Gate website), you must return your product to the place/website of purchase.

     

    180-DAY LIMITED WARRANTY

    Buddy Gate includes a 180-day limited warranty from the date of purchase, under reasonable and non-commercial use and conditions of maintenance.  In the event of a malfunction or defect during the in-warranty period, Buddy Gate, at its option, will replace or repair the gate or part under warranty. Buddy Gates’s limited warranty extends only to the gate’s original purchaser.  

    To make a claim, please email us at info@BuddyGate.net.  Please have proof of purchase.

     

    CONDITIONS THAT VOID WARRANTY

    Buddy Gate’s 180-day limited warranty does not cover a defect that has been caused by misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident.

     

    CONSUMER REIMBURSEMENT

    Buddy Gate does not provide refunds as a remedy for defective or nonconforming safety gates.  Buddy Gate will only offer cash back if there is a processing or shipping error made by Buddy Gate.

     

    Contact us at: info@BuddyGate.net

bottom of page