Keep your pet safely inside the garage while you're using it with a Buddy Gate. The 16 foot dog garage gate consists of six panels 31" W x 34" H each. Each set is 93" long and when assembled the gate is 186" long. The bars are 3" apart. Buddy Gate mounts and folds up in seconds so you can easily set it up when needed and store it when not in use. The safety gate has 2 swinging doors (21" each) for easy access and swinging panels for when you need a bigger opening. The gate is connected in the middle using 2 steel bars. Buddy Gate is made of all metal parts and powder coated panels for durability. Please properly measure your garage door frame to make sure the Buddy Gate will fit. *** It should be about 189".
READ BEFORE ORDERING.
The screws provided are made for wood door frames. The door frame should be no less than 188.5" and no more than 189.5" wide. The garage floor should be relatively level. Assembly and tools are required. *Buddy Gate should only be used under supervision.
Tools Needed:
- Wrench Set or Adjustable Wrench
- Phillips Screwdriver
- Tape Measure or Ruler
- Hand Level (not required but helpful)
- Recommended: Hand Drill with a 3/32 and 11/64 drill bit (or similar sizes for pilot holes)
16 Foot (189") Outdoor Garage Gate
Color: White
Use w/ Door Frame Width: 189 inches
Size of Gate Opening: 189 inches
Length of Panels: 30.8 inches
Total Length of Each Gate: 93 inches (Total Length: 186 inches)
Height: 34 inches
Width of Frame: 0.8 inches
Fold-up Size: 2 Sets - 32 x 34 x 5 inches
Weight: 49.8 pounds
Bar Diameter: 0.35 inches
Distance between Bars: 3 inches
Package Size: 2 Boxes - 35 x 32 x 4 inches each
Package Weight: 2 Boxes - 26.5 pounds each
READ BEFORE ORDERING.
The garage frame should be made of wood and the garage floor should be relatively level. The door frame should be no less than 188.5" and no more than 189.5" wide. Assembly and tools are required.
Tools Needed:
- Wrench Set or Adjustable Wrench
- Phillips Screwdriver
- Tape Measure or Ruler
- Hand Level (not required but helpful)
- Recommended: Hand Drill with a 3/32 and 11/64 drill bit (or similar sizes for pilot holes)
MAINTENANCE & CLEANING
Periodically check to make sure all the nuts are fully tightened. If any part becomes damaged, replace before reusing. If any part of the paint gets chipped or scratched, it is recommended to use a matching touchup paint to prevent any further damage and prevent rust.
When left outside in the rain, some rust colored water may settle on the bars. To